Automatic lubrication 3 ton per hour ring die biomass pellet mill
This product is mainly applicable for difficult molding materials with low adhesion rate,for example rice husk,sunflower husk,peanut shell and fruit shell;branch ,stem,bark and other wood waste,a variety of crop stalks,rubber,cement,ash and other chemical materials.It can be used in wood processing plants,fuel plants,fuel plants,fertilizer plants,feed making plant,chemical plants etc.Since it requires less investment and yield quicker result and that no risk,MZLV-G series efficient centrifugal pellet mill is an ideal dense compression molding equipment.
MZLV-G series efficient centrifugal pellet mill is our main product which has adopted the essence of pellet mill in oversea market.The heart parts "double layer die" has unique structural assembly and "rollers" are made of high wearable alloy materials.
These two parts have the following characters:particular design,reasonable structure,low energy,high efficiency,long lift and so on.Through many technical experts hard work,our company has developed this typical patent product which comes forth firstly in domestic market.The new machine has filled the country blank in vertical feeding for ring die pellet mill and reached the international advanced level.
1. the new discharge system:the integral pressing wheel of machine shell is more convenient to assemble
2. position adjustable:customer can change the position of the outlet and discharge motor accordingly to the site conditions.
3. high strength bearing structure:the main shaft adopts high-stiffness bearing structure,and is 15% thicker,which can make the output of pellet machine bigger.
4. the new main shaft frame positioning structure:greatly reducing time when replacing the roller,makes the roller disassemble easier.
5. oil lubricating system:air cooling lower the temperature,machine set with overpressure protection and under-voltage alarm,ensure long time and high load operation of the pellet machine.
6. the new roller surface:the new roller surface adopts the robot surfacing alloy technology,and prolong the service life of press roller.
7. the pellet machine die:the hole of die are processed by super high speed gun drill,and advanced vacuum furnace heating process.
FAQ
1. Q: What kind of materials can be using for pellet making?
A: Sawdust, EFB, Rice husk, straw, agriculture waste, grass, and other different kind of biomass materials
2. Q: Which moisture content is suitable for pellet making?
A: Most suitable moisture content is 10-15%.
3. Q: Which size can be feeding into pellet machine?
A: normally need the raw materials size smaller than the diameter of the output pellets diameter.
4. Q: What's your warranty time of the machine?
A: The roller husk and the ring die
5. Q: What's the wearing parts for the pellet machine?
A: 1 year, except the wearing parts.
6. Q: What 's the density of the output pellets
A: pellets density is 1.0-1.4g/cm3
TF advantages:
1. with more than 12year history,we have adundance experience on pellet machine and complete pellet line project
2. professional after-sell sevice,proving timely service.
3. strictly quality control system,guarantee all parts of pellet machine with good quality.
4. accept customized products,offering personalized solutions.
MZLV-G series efficient centrifugal pellet mill is our main product which has adopted the essence of pellet mill in oversea market.The heart parts "double layer die" has unique structural assembly and "rollers" are made of high wearable alloy materials.
These two parts have the following characters:particular design,reasonable structure,low energy,high efficiency,long lift and so on.Through many technical experts hard work,our company has developed this typical patent product which comes forth firstly in domestic market.The new machine has filled the country blank in vertical feeding for ring die pellet mill and reached the international advanced level.
1. the new discharge system:the integral pressing wheel of machine shell is more convenient to assemble
2. position adjustable:customer can change the position of the outlet and discharge motor accordingly to the site conditions.
3. high strength bearing structure:the main shaft adopts high-stiffness bearing structure,and is 15% thicker,which can make the output of pellet machine bigger.
4. the new main shaft frame positioning structure:greatly reducing time when replacing the roller,makes the roller disassemble easier.
5. oil lubricating system:air cooling lower the temperature,machine set with overpressure protection and under-voltage alarm,ensure long time and high load operation of the pellet machine.
6. the new roller surface:the new roller surface adopts the robot surfacing alloy technology,and prolong the service life of press roller.
7. the pellet machine die:the hole of die are processed by super high speed gun drill,and advanced vacuum furnace heating process.
FAQ
1. Q: What kind of materials can be using for pellet making?
A: Sawdust, EFB, Rice husk, straw, agriculture waste, grass, and other different kind of biomass materials
2. Q: Which moisture content is suitable for pellet making?
A: Most suitable moisture content is 10-15%.
3. Q: Which size can be feeding into pellet machine?
A: normally need the raw materials size smaller than the diameter of the output pellets diameter.
4. Q: What's your warranty time of the machine?
A: The roller husk and the ring die
5. Q: What's the wearing parts for the pellet machine?
A: 1 year, except the wearing parts.
6. Q: What 's the density of the output pellets
A: pellets density is 1.0-1.4g/cm3
TF advantages:
1. with more than 12year history,we have adundance experience on pellet machine and complete pellet line project
2. professional after-sell sevice,proving timely service.
3. strictly quality control system,guarantee all parts of pellet machine with good quality.
4. accept customized products,offering personalized solutions.
Reply your inquiry within 24 working hours.
Experienced staffs answer all your question in professional and fluent English.
Customized design is available.
Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers.
TF Factory Introduction:
Tongfu Pellet Mill with a group of dynamic engineers full of passion and vitality,advanced technology and production equipment,has been committed to feed machinery,grass machinery,biological fertilizer equipment and automation control equipment,design,manufacture and promotion.
With rich and practical experience,constant innovation and full responsibility to customers,we are doing perfect on every project and every itme with our thoughtful consideration.During the mutual development with customers,we are enjoying great sucess with customers to make customers satisfied.We provide clients with high quality products and fast services.we welcome new and regular customers from all over the world to visit our factory at any time.
Features of pellet machine
1.It is widely used for pelletizing all kinds of biomass particles, such as wood sawdust, straw, rice husk and coffee husk etc.
2.The main drive adopts the high accuracy gear driving, so the output is 20% more than the belt drive.
3.It uses the imported high quality bearings, oil seal to make sure the high-efficiency, stable performance and low noisy of the whole machine.
4.The feeder uses variable-frequency and variable-speed motor to make sure the good quality of the pellet.
5.Advanced world standard compensatory S-shaped coupling with the structure of novel, compact, safe, low-noisy and low fault.
6.Feeder, conditioner and chute are made of stainless steel with long service life.
7.It is with magnet and over load protection system, which can protect machine well during production
8.We have different bore diameter of the ring dies for your choice. And the feeder is with a variable speed controlled to meet different outputs requirements.
9.We have oversized conditioner and jacked conditioner for choosing to enhance the effect of the pellet condition.
Various kinds of raw material to make pellet: Raw material can be any type of Agro-Forestry waste,like wood log,wood branch,wood skin,wood chips,stalk,straw,peanut shell,rice husk,etc.
agricultural waste(wheat stalk,corn stalk,peanut shell,rice husk,straw,etc.) and wood waste(scobs,wood branch,wood chips,wood shaving,log's skin,etc.)
Output pellet:
the final size could be:Φ6, 8, 10, 12mm, etc. length is adjustable,strictly follow EU Standard.
Specifications of pellet machine
| Type | Vertical | |||||
| Model | MZLV 480 | MZLV 480 | MZLV 560 | MZLV 560 | MZLV 560 | MZLV 700 |
| Power(KW) | 55 | 75 | 90 | 110 | 132 | 160 |
| Capacity(T/H) | 0.5-0.6 | 0.9-1 | 1-1.2 | 1.5-1.8 | 2-2.5 | 2.5-3 |
| Ring Die(mm) | 480 | 480 | 560 | 560 | 560 | 700 |
| Remark | 2 layer ring die. We have 560R(Reducer type).560G(Gear type) | |||||
Packing&Shipping of pellet machine
1.Wooden or metal case according to specific size of each Wood Pellet Making Machine.
we twine thick plastic coating for each Wood Pellet Making Machine.
2.Tight the equipment in the truck without space to ensure no rubbing during the transportation.
We also produce Complete Wood Pellet Production Line Mainly includes:
1.Crushing process - Hammer mill
2.Drying process - Wood Sawdust rotary dryer
3.Pelletizing process - wood Sawdust pellet mill
4.Cooling process - Pellet cooling machine
5.Packing process - Pellet packing machine
FAQ
1) what about the size of the final wood pellet product?
the size is adjustable according to your requirement.
the diameter range of the wood pellet is ø6-10 mm by using different ring die mould.
the length of the wood pellet could be adjusted on the machine.
2) What is the suitable moisture (water content) of the raw material that easy to make pellet?
the ideal moisture range is from 15% to 18% .
3) will you dispatch engineer to install the wood pellet machine (production line)?
Yes. we will dispatch engineer to do the service just based on the requirement of customers.
To supply you best recommendation and detailed quotation, please let us know:
1. What's the capacity you want?
2. What's the raw material?
3. What's the size of the raw material?
4. What's the moisture content?
5. What's the final pellet size do you want?
Please contact us freely to get more information about the product.
pelletmachine.en.made-in-china.com